Armourfast 1/72 Stuh 42 (99023)
2 posters
Page 1 of 1
Armourfast 1/72 Stuh 42 (99023)
Brought this kit for 6 pounds at the Hornchurch model show, not bad for two models. As others have said, the detailing is a bit bad but they are good for trying new techniques. This was my first attempt at using pigments. I flooded the pigments with white spirit once they were on the model, however, they rub off really easily. Is it just that white spirit is'nt strong enough, should I get some Ak interactives/ MIG pigment fixer
I cut off the barrel, somehow managed to get a hole in it and then glued it back together. I dont have any small drill bits, or a small drill. I am thinking of getting one however, as I will use it alot. For the second model in the box, I am going to add camoflauge, possibly attempt zimmerit and buy some metal stowage items from SHQ.
Here is my first attempt at using pigments:
JOSH
I cut off the barrel, somehow managed to get a hole in it and then glued it back together. I dont have any small drill bits, or a small drill. I am thinking of getting one however, as I will use it alot. For the second model in the box, I am going to add camoflauge, possibly attempt zimmerit and buy some metal stowage items from SHQ.
Here is my first attempt at using pigments:
JOSH
Re: Armourfast 1/72 Stuh 42 (99023)
Very nice build Josh
Regards, Bernard
Regards, Bernard
bernard5802- Posts : 281
Points : 322
Join date : 2011-06-18
Age : 66
Location : Belgium
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|